The EPEVER Tracer AN Collection Solar Charge Controller is often a highly productive solar controller created for off-grid photo voltaic devices. According to multiphase synchronous rectification know-how, it makes sure optimized Vitality conversion and technique security for a wide array of photovoltaic (PV) purposes.
Vital Features of the EPEVER Tracer AN Series Controller
The Tracer AN series utilizes EPEVER Solar Charge Controller technology for exceptional solar Power harvesting. Important attributes contain:
Multiphase Synchronous Rectification (MSR) for improved Vitality conversion.
Highly developed MPPT Algorithm with >99% effectiveness.
Dual-Phase Charging for Improved battery daily life.
Liquid crystal display Screen with authentic-time details checking.
Multiple Load Handle Modes including guide and timer.
Detailed Digital Protections versus overcharging, around-discharging, shorter circuits, and reverse polarity.
Move-by-Action Guideline to Starting the EPEVER Tracer AN Sequence Controller
1. Unboxing and Getting ready the Controller
Be certain all factors are bundled: Tracer AN device, temperature sensor, conversation cables, and consumer manual.
Validate the product amount and voltage ratings match your solar panel and battery specifications.
two. Mounting the Charge Controller
Decide on a properly-ventilated, dry site near to the battery financial institution.
Secure the Tracer AN controller utilizing the delivered mounting brackets.
Retain suitable clearance for heat dissipation.
3. Wiring the Photo voltaic Demand Controller
Caution: Usually follow good basic safety protocols and ensure the method is run off ahead of connecting parts.
Phase 1: Connect the battery terminals to the charge controller (beneficial to constructive, detrimental to adverse).
Move two: Join the photo voltaic panel array to your PV input terminals.
Stage 3: Join the load terminals if employing a immediate load connection.
Move four: Double-Look at all connections for polarity and tightness.
four. Configuring the Controller Configurations
Electrical power about the controller by connecting the battery first.
Use the Liquid crystal display Screen to navigate the settings menu.
Configure:
Battery Style: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Management Modes: Manual, timer, light-weight Management.
5. Monitoring and Knowledge Logging
The Tracer AN Series supports authentic-time monitoring using the MT50 distant meter.
Knowledge could be logged by using the RS485 communication port working with program like Photo voltaic Station Computer.
Distant monitoring can be done with the EPEVER WiFi module.
six. Troubleshooting Widespread Concerns
Situation 1: No Power Output
Test battery voltage and connections.
Verify PV panel voltage exceeds battery voltage.
Concern 2: About-Voltage Security
Verify the photo voltaic array’s voltage score.
Alter method parameters if important.
Concern three: No Battery Charging
Inspect PV wiring for continuity.
Verify MPPT configurations while in the menu.
Great things about the Tracer AN Sequence with MSR Technologies
The multiphase synchronous rectification technological know-how assures:
Higher Performance: Minimized Power losses all through conversion.
Improved Dependability: Click Here Steady effectiveness beneath variable hundreds.
Lengthier Battery Lifestyle: Regular and correct charging profiles.
Conclusion
The EPEVER Photo voltaic Demand Controller with multiphase synchronous rectification engineering is undoubtedly an Remarkable option for optimizing solar power era and extending battery daily life. By following the above mentioned setup information, end users can make certain maximum effectiveness and process longevity.